Correct order of hierarchy of manual handling

Manual handling means to use force or physical exertion to move something, by means such as pushing, pulling, lifting, carrying. Manual handling takes place continually in an early learning centre, such as when lifting or carrying children, furniture or other equipment. When not performed appropriately, manual handling can unfortunately lead to The MHO Regulations set a hierarchy of measures under which the employer must: Avoid hazardous manual handling, so far as is reasonably practicable. Assess the risk of any hazardous manual handling operation, which cannot be avoided. Reduce the risk of injury, so far as is reasonably practicable. 4.1 Avoiding the Hazard. Key points NIOSH defines five rungs of the Hierarchy of Controls: elimination, substitution, engineering controls, administrative controls and personal protective equipment. The hierarchy is arranged beginning with the most effective controls and proceeds to the least effective. Although eliminating the hazard is the ultimate goal, it can be difficult and is not always possible. The regulations set out a hierarchy of measures to reduce the risks of manual handling. These are in regulation 4(1) and are as follows: The guidance on the Manual Handling Regulations includes a risk assessment filter and checklist to help employers assess manual handling tasks. A revised version of the MHOR was published in March 2004. At the top of the Hierarchy of Controls, we start with the most effective option - Elimination. 1. Elimination. Physical removal of the hazard — this is the most effective hazard control. For example, if employees must work high above the ground, the hazard can be eliminated by moving the piece they are working on to ground level to One important tool safety engineers and production managers use to minimize or eliminate worker exposure is the hierarchy of hazard control. This simple hierarchy allows facilities to select the most appropriate control to reduce hazards identified in the workplace. Many of these hazard control solutions include simple interventions, like It is important to select the correct PPE for the hazard identified, and advice should be sought in this regard if you are not sure (Health and Safety ext. 4900) The above "Hierarchy of Control" provides a basic guide for controlling hazards in the workplace. Consult your SHR and attempt to find solutions by working your way down the hierarchy. The following is the general hierarchy of control: Elimination Substation Engineering controls Administrative controls with warnings and signage Personal protective equipment. While doing the risk assessment, if risks are high then we need to introduce control measures to bring down the risk. manual handling of loads, defined as 'the transporting, including the lifting, putting down, pushing, pulling, carrying, of a load'. It is the cause of a large number of injuries each year, and these activities are associated with about 25% of reportable accidents. Manual Handling injuries can also result in long term absence Since no single control measure always work, the hierarchy of control serves as a guide as we work through the process of risk control. The hierarchy of risk control is useful in determining which control measures are appropriate. Hierarchy of Controls The elements of hierarchy of control follows thus: Elimination Substitution Engineering controls