Trans tint dye instructions

To add to water-based finishes, add a small amount of water to the TransTint stain first (20% by volume is a good starting point), then stir gently for 30 seconds. Let the dye/finish sit for at least 10 minutes before using.

transtint blue
transtint dye near me
transtint alternative
wood dyes
transtint cordovantranstint color wheel
transtint dye polyurethane
transtint brown mahogany

TransTint Liquid Dyes are a solution of metal-complex dyes in a special solvent Data Sheet for using TransTints in Lutherie – TransTint for Luthiers Instructions. way to finish soft maple using TransTint dye mixed with water or alcohol. Neil Blotch Control per the instructions provided by Charles Neil. 12 Dec 2014 To add to water based finishes, stir the desired amount into the finish (adding 5-10% water to the TransTint first helps disperse the dye into the finish), then stir gently for 30 seconds. TransTint Dye Concentrate - 2 oz. - Finishing See the link below for detailed mixing instructions and helpful notes on color correction and mixing custom hues. Mix with Alcohol: As with water, the ratio of 1 ounce dye to 1 quart of alcohol is a starting point, and you can increase or decrease solvent to suit your need. Mix with Water & Alcohol: A 50/50 mix of water and alcohol is a very satisfactory solvent for applying TransTints. I have gotten dyes from cabinet companies when I needed to match another Transtint dye and water or alcohol (I use alcohol) mix to the color you like. You must know the proper steps and techniques, then you must Bright Red TransTint dye, plus white WunderFill on cherry and oak. . According to the directions it can be mixed with several things, I personally am using25 Mar 2011